Manufacturers of fiber-reinforced polymer structures for infrastructure applications produce composite bridge decks, utility poles, cable trays, structural profiles, and architectural components in production environments where cables, hoses, and vacuum tubing face continuous mechanical stress, resin exposure, and abrasion throughout the manufacturing process.
M.M. Newman Corporation’s Heli-Tube® spiral cable wrap is used in FRP and composite structure manufacturing environments to protect and organize vacuum lines, resin hoses, pneumatic tubing, and production equipment cables across layup, infusion, and curing operations.
FRP and composite structure manufacturing environments create demanding conditions for cables, hoses, and tubing throughout production. Common challenges include:
These conditions reduce the service life of vacuum lines, resin hoses, and equipment cables and can affect production consistency in composite structure manufacturing operations.




Abrasion is the most common cause of cable and hose failure in composite production. Vacuum lines, resin hoses, and equipment cables wear continuously against mold surfaces, tooling edges, and production fixtures throughout every manufacturing cycle. Heli-Tube® absorbs that contact wear in place of the line beneath it.
Heli-Tube® Spiral Cable Wrap options are designed to protect vacuum lines, resin hoses, pneumatic tubing, and production equipment cables across FRP and composite structure manufacturing environments.
Heli-Tube® spiral cable wrap supports a wide range of FRP and composite structure manufacturing applications:
Heli-Tube® spiral cable wrap is available in materials suited for FRP and composite structure manufacturing environments:
Suitable for general production equipment cable management and composite manufacturing applications with moderate resin and chemical exposure
Higher abrasion resistance for production environments with elevated mechanical contact and continuous wear on cables and hose assemblies
Chemically inert with a broad operating temperature range for demanding infusion process environments with elevated resin system exposure, elevated cure temperatures, and strict material compatibility requirements
Each option supports long-term production performance based on chemical environment, mechanical demand, and manufacturing process conditions.
FRP and composite structure manufacturers need cable and hose protection solutions that withstand the chemical, mechanical, and thermal demands of continuous production operations. Heli-Tube® spiral cable wrap helps protect and organize vacuum lines, resin hoses, pneumatic tubing, and production equipment cables while supporting the production consistency and maintenance efficiency that high-volume composite manufacturing requires.
From vacuum infusion setups and resin distribution systems to production equipment cable management and large-part mold operations, Heli-Tube® contributes to reliable production performance and extended service life for cables and hoses across composite structure manufacturing environments. M.M. Newman Corporation delivers solutions engineered for the process demands and operating conditions of FRP and infrastructure composite manufacturing.
Heli-Tube® protects and organizes vacuum tubing, resin feed lines, pneumatic hoses, and production equipment cables in FRP and composite structure manufacturing environments. It reduces abrasion from mold and tooling contact, helps prevent kinking in vacuum and resin lines, and organizes multi-line assemblies across infusion setups and production equipment.
Heli-Tube® is available in chemical-resistant material options including PTFE, which is inert to a broad range of resin systems, hardeners, and solvents used in composite manufacturing. Confirm material selection against the specific chemicals and process conditions in the application.
Yes. Heli-Tube® spiral cable wrap supports the outer diameter of vacuum tubing and resin feed lines to reduce kinking along routing paths across mold surfaces and through production fixtures, supporting consistent vacuum and resin flow throughout the infusion process.
Yes. Heli-Tube® can be removed and reapplied across production cycles, supporting reuse of vacuum tubing and hose assemblies and reducing material consumption in high-volume composite structure manufacturing operations.
Heli-Tube® is available in a wide range of diameters, from small-diameter vacuum and resin lines to large pneumatic hose assemblies and multi-cable production equipment bundles. We can produce custom configurations to meet specific mold, tooling, and production routing requirements.